Barricade Ultimate Sprayable Bedliner

Brand: Rugged Restore

Product Code: rr_barricade_single

Availability:In stock

$31.99 $39.99 31.99

Available Options

Qty

THE ULTIMATE IN DIY BEDLINER! 

Barricade Sprayable Bedliner is the best bedliner option for do it yourselfers!

Perfect for Truck Beds, 4x4 Interiors, Bumpers, Sliders, Fenders, Underbodies, Frames, Wheel Wells, Rocker Panels, and More!

Save the huge expense of having a commercial bedliner company install your bedliner, you can do it right from home with Barricade Sprayable Bedliner.

Ready to Spray! Water-based for easy clean up, super resilient, and extremely easy to apply with our easy-to-use sprayer, paint roller, or even a paint brush!

Features:

  • Long-lasting Protection from Corrosion & Abrasion
  • Insulates from Drive Train & Road Noise
  • Keeps Coated Surfaces Looking Great
  • Ready to Use - No mixing, activators, solvents, or extra chemicals to handle, simply screw the sprayer into the container, adjust your spray, and coat the surface!
  • Easy Application with Multiple Application Options
  • Easy to Repair & Reapply
  • Each Bottle Covers Approximately 12 Square Feet
  • 🇺🇸  MADE IN THE USA! 🇺🇸 

Looking for a Non-Slip Coating Product? Check out Barricade GRIP Non-Slip Coating!

Purchase Options:

  1. Individual (1) Quart Bottle
  2. Individual Sprayer*
  3. Large Kit without Sprayer -  (4) Quarts of Barricade Sprayable Bedliner
  4. Large Kit with Sprayer - (4) Quarts of Barricade Sprayable Bedliner Plus (1) Sprayer (Covers Approximately 48 Square Feet) - Perfect for most Truck Beds or Full Jeep Interiors
  5. Small Kit with Sprayer - (2) Quarts of Barricade Sprayable Bedliner Plus (1) Sprayer (Covers Approximately 24 Square Feet) - Perfect for Smaller Areas, Fenders, Rocker Panels, and more

Check out this informational and how-to video:

Directions for Use:

  • Product is ready to use. Do not add water or solvents.
  • For best results, sand & thoroughly degrease & dry all surfaces that will be coated.
  • Mask areas to prevent overspray, remove tape before coating dries.
  • Apply in minimum of 55°F & relative humidity above 20%.
  • Use eye, skin, & respiratory protection with adequate ventilation, may stain clothing.

Clean Up:

  • Wet Coating - clean up with water & towels.
  • Dry coating - may be mechanically removed/scraped.

Spray Application:

  • Do not apply in direct sunlight.
  • Use Speciality Sprayer available at Rugged Restore (this page).
    • Air Requirements: Working pressure: 40-60 psi (max 140 psi). Approximate air consumption: 5-8 CFM. 
  • Ensure air supply is clean & free of moisture and oil.
  • Screw Sprayer directly into Barricade Sprayable Bedliner bottle.
  • Using a scrap piece of cardboard or wood, adjust sprayer pressure (30-90psi) & nozzle to achieve desired pattern & thickness.
  • Spray on vertical surfaces first, then on horizontal surfaces.
  • Apply full coat on all surfaces. Product will appear gray when wet, & will change to black as it dries.
  • Additional coats may be applied after drying for additional thickness or area repair. 
  • Additional coats may cause the area to appear more gloss than a single coat.

Roll On/Brush On Application:

  • Do not apply in direct sunlight.
  • Use thick nap or foam roller or quality paint brush.
  • Place coating into suitable container for roller or brush access.
  • Apply to vertical surfaces first, then to horizontal surfaces.
  • Apply full coat on all surfaces. Product will appear gray when wet, & will change to black as it dries.
  • Additional coats may be applied after drying for additional thickness or area repair. Additional coats may cause the area to appear more gloss than a single coat.

Other Notes:

Dries in 1 hour at 75°F and 40% humidity. Cooler temperatures will require more time. minimum temperature is 55°F. Do not allow water to sit on coating for at least 1 week.

Thoroughly clean Sprayer and other tools with water immediately after use.

*Sprayer comes with 1/4″ NPT air connector threading, you will need to supply the correct fitting to connect to your air hose. Sprayer is made in Italy.

Looking for Technical Information? Download the MSDS

Customer Reviews

Based on 6 reviews Write a Review