ALL PRODUCTS

DESCRIPTION: Keep your rig looking shiny and easier to clean for up to 6 months with Shield Surface Coating & Sealant. FEATURES: Like it's big brother Armor, Shield offers amazing protection for all surfaces of your off-road vehicle, making it easier to clean and keeping surfaces protected from harsh chemicals, UV rays, and other damaging elements. Use after each wash for best performance, a little goes a long way, but makes a tremendous difference. Great for Use on: Paint Vinyl Wraps Bumpers  Suspension Undercarriage Glass Tops/Fiberglass Plastic Power Coated Surfaces Sizes:  8 Fl. Oz 16 Fl. Oz HOW TO USE: Paint, Glass, Vinyl, Plastics - Spray onto surface and buff with a microfiber towel Bumpers, Suspension, Undercarriage - Spray a lighter amount onto surface, let dry. No need to buff off of hard to reach or non-gloss surfaces Apply to one panel or area at a time Shield can be used with any other car care products as a base or top layer to Armor. It can also be used as a drying aid by diluting between 1:2, spraying onto a wet surface and drying with a Sidekick Drying Towel Do not apply in direct sunlight allowing product to dry Can be layered for increased gloss and protection If residue is hard to remove, wipe with a damp microfiber towel Shield needs to be used within two years from the date purchased, once opened it has a shelf life of 1 year

DESCRIPTION: Keep your paint and other surfaces protected from the wear and tear of the trail, road, weather, and environmental factors with Armor Ultra Durable Ceramic Coating! If it takes you longer to clean your rig than you got to spend playing in it, you need Armor...it prevents mud, dirt, dust, and other contaminants from sticking to your surfaces. Get it dirty, then rinse it off, no heavy scrubbing or rubbing! FEATURES: Keep your paint protected from sun fading, road salt and grime, water spots, and other environmental factors, plus get that sexy hydrophobic beading everyone loves when it gets wet! Armor creates a barrier on your paint, suspension, bumpers, fenders, and glass to keep water flowing off and dirt from sticking to all of those hard to reach and hard to clean places. Also adds protection against trail rash (for minor swirls and marks). Lasts over 5 years per application! Great for Use on: Barricade Bedliner Paint Vinyl Wraps Bumpers  Suspension Undercarriage Glass Tops/Fiberglass Plastic Powder Coated Surfaces Comes in a reusable outdoor water resistant storage case (keep for use on the trail). Photo Note - the suspension and fender on this Jeep were coated prior to 6 days in Moab, and 1400 miles on a trailer through mud, ice, and snow. As you can see, the springs, steering, shocks, and under side of the fenders are clean.  HOW TO USE: Coverage - a single 50ml bottle will cover most 4x4s like Jeeps, including bumpers and fenders. For larger vehicles, or if you intend on applying to undercarriage, suspension, or other parts, we recommend 2 bottles. *Can be poured into a small atomizing spray bottle or touchup spray gun for easier application to suspension and other undercarriage parts. Will use more product. Installation Information: In addition to this kit you will need at least two but ideally four high quality microfiber towels Ensure that your vehicle is out of direct sunlight but warmer than 41 degrees F, is completely dry and will stay dry for at least 12 hours after application If needed, polish your paintwork either by machine or by hand to remove any imperfections Thoroughly clean and dry all surfaces to be coated, with a final wipe down with All Surface Cleaner Put on the nitrile gloves provided Drop several (between 5 and 10) drops of product onto the applicator provided. Work the liquid into the pad to get an even saturation Paint/Vinyl Wraps: Apply with applicator provided in overlapping strokes to an area roughly 2’ x 2’, or work to the body lines of the vehicle If the surface of the vehicle is between 41 and 60 degrees F, wait for two minutes and then fold your first towel twice to form a square, spread and remove most of the residue using a light touch. If the surface is between 60 and 77 wait for one minute and for temperatures above this, remove immediately With your second folded cloth remove all remaining residues. We advise to move your head so that you get direct and oblique views of your finish to spot all residue. It is also advisable to use bright, but flat lighting, to make residue spotting easier Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of ARMOR. You do not need to wait between applying the first and second coating but it will not make it harder to apply the second coating if you do leave a much longer interval between applying the first and second layer Allow the coating to cure for at least 12 hours before getting wet We recommend allowing at least one week pass before washing your rig Barricade/Suspension/Bumpers/Other Parts: In addition to the instructions above, you may use the following installation options on these parts: Apply to most bumpers as you would paint, Barricade bedliner or rough bumpers may leave microfiber residue/fibers, so you may wish to wipe on and let dry without removing excess. You can also use a small HVLP gun to spray onto the surface for parts that don't need to be wiped. CAUTION - wear eye and lung protection when doing so. For suspension, a wipe on/leave on technique works well, no need to remove the excess product. ARMOR can be poured into a small atomizing spray bottle for easier application, simply spray and leave on suspension parts. Note - this will use more product. For maintaining your finish we recommend hand washing your vehicle using a Wash Shampoo.  Use REPEL sealant every few washes for even better protection, clean-ability, and longevity of ARMOR You will find that your vehicle is significantly easier to clean and while ARMOR has significantly better resistance to caustic wash chemicals these chemicals will shorten the lifespan of any coating and are not recommended as part of your care routine An unopened bottle of ARMOR has a 12-18 month shelf life from the time of purchase Store opened bottles in a dry and cool storage area that's out of direct sunlight We recommend using opened bottles within three months of opening

DESCRIPTION: This high-quality MICROFIBER & FOAM APPLICATOR SPONGE is an easy to use microfiber wax, coating, sealant, and dressing applicator. The inside sewn edges insure that only premium microfiber fabric is in contract with your paint. FEATURES: Perfect for use with our SHINE & PROTECT product on engines, tires, bumpers, etc.  The rectangle cubic shape provides two 3.5”x5” (for a total of 35 square inches) surfaces for application. It fits right in the palm of your hand - is easy to hold and maneuver. The flat surface covers more area for faster application. The medium-firm sponge core gently conforms to contoured surfaces and you glide across the surface. The lightweight, short pile, terry microfiber absorbs minimal product, while applying the product evenly and smoothly. When used for dressings, store in plastic bag for reuse, which saves product. Buy more than one for multiple uses, it's not recommended that you use the same applicator for tires, engine, and interior surfaces due to cross-contamination. SPECIFICATIONS: Professional quality 5” x 3”x 1.75” 260gsm Microfiber Terry 80% Polyester and 20% Polyamide - 100% Split Inside Sewn Seam Color May Vary

DESCRIPTION: With the soft and safe cleaning power of microfiber "fingers", you'll be able to get into all the nooks and crannies, while ensuring you won't scratch the finish. Don't just grab a dirty sponge or dish rag when it comes time to wash your rig and toys, use this super soft microfiber wash mitt! FEATURES: Safe and effective on all surfaces Non-scratch microfiber chenille weave - no exposed tag High quality blue microfiber gently washes away dirt and debris Seem inside the mitt for hand comfort and control without slipping off Machine washable

DESCRIPTION: This innovative glass cleaning towel design is constructed to make glass cleaning easier and more efficient. FEATURES: This microfiber cleaning towel is folded and pre-sewn so that it is flipped and turned inside out after each towel section becomes over-saturated with product. Use the twist side of the car window towels to clean and scrub the glass, use the smooth pile side to buff away any residue and moisture streak and lint free. When those sides become oversaturated, flip the car window cleaning cloth inside out and continue cleaning your windows and mirrors. These 8"x8" 500/200 gsm towels are designed to use with the Reacher Tool, but can also be used by hand.  Put your hand inside the pocket, and use as a mitt, for better control in tight and hard to reach places.

Show that you're not afraid to get dirty with this awesome high-quality racerback tank. Perfect for those "topless" summer days! SPECIFICATIONS: 4 oz. 60% combed ringspun cotton/40% polyester lightweight jersey  

We've never met a toddler that was afraid to get dirty! This cool little toddler t-shirt will have your little people looking great! SPECIFICATIONS: 4.5 oz., 100% combed ringspun cotton Topstitched rib collar Double-needle stitched sleeves and bottom hem Shoulder-to-shoulder taping with EasyTear™ label  

We've never met a toddler that was afraid to get dirty! This cool little toddler t-shirt will have your little people looking great! SPECIFICATIONS: 4.5 oz., 100% combed ringspun cotton Topstitched rib collar Double-needle stitched sleeves and bottom hem Shoulder-to-shoulder taping with EasyTear™ label

Don't Be Afraid to Get Dirty! Perfect for both men and women, whether you're on the trail, at camp, or out and about, this t-shirt will keep you comfortable and ready to go! Our most popular unisex shirt! SPECIFICATIONS: 100% combed and ring-spun cotton 4.3-ounce and 30 singles Rib-Knit Crew Neck Double needle sleeves and hem  

Don't Be Afraid to Get Dirty! Perfect for both men and women, whether you're on the trail, at camp, or out and about, this t-shirt will keep you comfortable and ready to go! Our most popular unisex shirt! SPECIFICATIONS: 100% combed and ring-spun cotton 4.3-ounce and 30 singles Rib-Knit Crew Neck Double needle sleeves and hem

We know babies aren't afraid to get dirty! Really cute Baby Onesie for your little ones. SPECIFICATIONS: 4.5 oz., 100% combed ringspun cotton Double-needle stitched rib binding on neck, sleeves, leg openings and shoulders Flatlock seams EasyTear™ label Reinforced three-snap closure on binding  

We know babies aren't afraid to get dirty! Really cute Baby Onesie for your little ones. SPECIFICATIONS: 4.5 oz., 100% combed ringspun cotton Double-needle stitched rib binding on neck, sleeves, leg openings and shoulders Flatlock seams EasyTear™ label Reinforced three-snap closure on binding

Don't Be Afraid to Get Dirty! Great men's t-shirt that is slightly fitted for comfort and fit, perfect for any occasion! SPECIFICATIONS: 100% combed and ring-spun cotton 4.2-ounce and 30 singles Side seams with a retail fit Shoulder to shoulder taping  

Don't Be Afraid to Get Dirty! Great men's t-shirt that is slightly fitted for comfort and fit, perfect for any occasion! SPECIFICATIONS: 100% combed and ring-spun cotton 4.2-ounce and 30 singles Side seams with a retail fit Shoulder to shoulder taping

Don't Be Afraid to Get Dirty! One part comfort + One part style, the perfect trail t-shirt for women, slightly fitted (see sizing chart). SPECIFICATIONS: 4.3-ounce 100% ring spun combed cotton  

Don't Be Afraid to Get Dirty! One part comfort + One part style, the perfect trail t-shirt for women, slightly fitted (see sizing chart). SPECIFICATIONS: 4.3-ounce 100% ring spun combed cotton

Perfect for those cool trail or camp spot mornings and evenings, this high-quality hoodie will keep you cozy and warm! SPECIFICATIONS: 9-ounce, 50/50 cotton/poly fleece Air jet yarn for a soft, pill-resistant finish Two-Ply Hood Set in Sleeves with rib knit cuffs and waistband Front Pouch Pocket  

Perfect for those cool trail or camp spot mornings and evenings, this high-quality hoodie will keep you cozy and warm! SPECIFICATIONS: 9-ounce, 50/50 cotton/poly fleece Air jet yarn for a soft, pill-resistant finish Two-Ply Hood Set in Sleeves with rib knit cuffs and waistband Front Pouch Pocket

Show that you're not afraid to get dirty with this awesome high-quality racerback tank. Perfect for those "topless" summer days! SPECIFICATIONS: 4 oz. 60% combed ringspun cotton/40% polyester lightweight jersey