TRIM RENEW BLACK TRIM RESTORER Trim Restorer 4oz Trim Renew Kit - Black
TRIM RENEW BLACK TRIM RESTORER from $9.99 $19.99
We all hate the sight of faded trim, bumpers, hard tops, and other plastics around our prized possessions. Fender flares, bumpers, running boards, and cowls are especially prone to fading, and if yours are faded, you know how bad they look! You can apply dressing to them temporarily, but this only masks the problem. Why not actually fix the faded trim instead and make your rig look years younger! With Rugged Restore Trim Renew, you can restore and renew your faded plastics and keep them looking great for a long time!  Brings Back Black - won't just cover up or grease your faded plastics like some of the other cheap alternatives Protects and Conditions - not just a restorer, protects and conditions the material Works on Many Surfaces - restore fender flares, bumpers, mud flaps, wipers, and more Professional Results - widely used and loved in the professional detailing industry, you will get unmatched professional results One Bottle, Many Applications - Each bottle contains enough product for many applications, either on multiple vehicles, or for years of use! Trim Renew is an incredible new product that restores originally black surfaces to a deep, rich black with-out the "wet look" shine that dries quickly with no greasy residue. BUT DON'T TAKE OUR WORD FOR IT! Trim Renew is ideal for restoring, conditioning and protecting any originally black surfaces, such as: Fender flares Bumpers, pads and trim Mirrors Mud flaps Window trim Seals Running boards Truck bed caps and covers Black fiberglass hard tops Handles and wiper blades Works great for all vehicles with black trim, from Jeeps, Toyotas, Land Rover, Motorcycles, UTVs/ATVs, and more!   NOW AVAILABLE FOR ALL COLORS! With the addition of our new clear formula, you can restore all colors of plastic back to their unfaded glory! Works on all colors as well as black. Extremely faded black trim is better suited for our original Black formula. Select the clear version (for all colors) to add it to your cart! Our unique formula combines ancient ingredients with advanced polymer technology to provide a spectacular long-lasting, glossy black protective finish. Use what professional detailers use! Lasts approximately 9-12 months or more with regular washes before reapplication is needed. Top with ARMOR and extend the life of the restoration! 4OZ KIT INCLUDES: 4oz Trim Renew (plenty for a multiple vehicles, a little goes a long way) Applicator Pad Disposable Plastic Gloves Disposable Shop Towel to Remove Residue 1OZ INCLUDES: 1oz Sample Bottle Only - use surface safe towels for application, gloves recommended, or buy applicator and towels here. DIRECTIONS: For best results, apply to a clean, cool surface in the shade. To clean, use All Surface Cleaner or wash with a oil-fighting dishwashing detergent like Dawn to remove all contaminants and oils. Protect surrounding paint work using easily removable masking tape (blue painter's tape). This will make clean up easier and faster. Wear gloves and eye protection. Shake bottle well and apply a small amount to applicator pad or microfiber sponge. Spread a thin coat over area in an even motion, covering area completely. Allow solution to penetrate for 1-2 minutes. Use a clean microfiber sponge or foam pad to buff off excess and wipe off glass and paint (will stain unsealed paint). Admire the results! Top with ARMOR and extend the life of the restoration! Helpful Hints and Recommendations: Use with adequate ventilation. Trim Renew will stain clothing and skin. Do not use on painted or glass surfaces; wipe off immediately with a clean applicator pad, terry cloth or microfiber towel if solution gets on these areas. For best results after using Trim Renew, do not wash treated area for at least 4 hours. Use Trim Renew only as intended. Satisfaction guaranteed when used as directed. Manufacturere’s liability limited to replacement of product or refund of purchase price upon return of unused portion and proof of purchase. Store Trim Renew in a dry, cool place away from heat or flame. Keep bottles tightly closed when not in use. Applicator pads can be reused if stored in a sealed plastic bag. On very smooth plastic, may require multiple applications to achieve desired results. It may be necessary to "scuff" the surface with high grit (1500-3000) sand paper or steel wool. CAUTION! Contains organic oil, which can cause Spontaneous Combustion. Oils of this type can generate heat as it dries, which can cause combustion to occur. Oily rags, applicators, and materials in contact with Trim Renew can cause fires if not handled properly. Never pile used oily materials or leave where heat is present. Immediately after use and before disposal or storage, you must: Hand wash towels and sponges with detergent and rinse well. Spread all rinsed materials outside to dry by flattening them in a well ventilated spot.  MADE IN THE USA! Formulated & Made for Rugged Restore exclusively by Solution Finish specifically for off-road vehicles.
Barricade Ultimate Sprayable Bedliner Coatings Large Kit (4) Quarts + Sprayer BLACK
Barricade Ultimate Sprayable Bedliner from $14.99 $49.99
Enhance Your Vehicle's Defense with Our Sprayable Bedliner THE ULTIMATE IN DIY BEDLINER!  Barricade Sprayable Bedliner is the best bedliner option for do it yourselfers! Perfect for Truck Beds, 4x4 Interiors, Bumpers, Sliders, Fenders, Underbodies, Frames, Wheel Wells, Rocker Panels, and More! Save the huge expense of having a commercial bedliner company install your bedliner, you can do it right from home with Barricade Sprayable Bedliner. Ready to Spray! Water-based for easy clean up, super resilient, and extremely easy to apply with our easy-to-use sprayer, paint roller, or even a paint brush!    STOCK NOTE - we are running low on some colors. If we cannot fill your order, we will notify you right away to determine how you would like to proceed.  *actual colors may vary from what is on your device to do screen variations. Colors shown all together are rolled out onto a sheet of OSB. The black and gray and gray images are spray outs. More spray out images coming. Features: Save $100s Over Professional Installation - With this easy to use bedliner, you can do it yourself and save $100s over professionally applied coatings, but with awesome results! Ready to Use - No Mixing - No extra bottles, solvents, activators, or anything else to mix and use! Just insert the sprayer or pour into a container for rolling, and you're ready to go! Easy Water Clean Up - No Solvents or Chemicals - Unlike other products out there, Barricade Sprayable Bedliner is water-based, so you don't need solvents or other harsh chemicals for clean up. Just use water! Fully Adjustable Texture - Unlike other products on the market, YOU can decide what you want the texture to look like. With our high quality adjustable spray gun, you control how to apply the product to get the ultimate look & texture you want. Paintable - Match Any Color - Barricade's unique formula allows it for excellent paint adhesion. If you want protection, but the color matches your existing paint, Barricade is the best bedliner spray! Easy Application with Multiple OptionsEither insert the custom sprayer into the bottle for a sprayable application, or use a foam roller or paint brush. Any way you apply it, it's easy and looks great! Affordable Long-lasting ProtectionKeeps your vehicle's parts protected from road debris, oils, salt, corrosion, abrasion, abuse, and more! Insulates from Drive Train & Road Noise - Add a layer of sound deadening between you, the road, and your engine! Keeps Coated Surfaces Looking Great - With a great textured look, and added protection, coated areas look great for years to come! Plus, it's easy to repair with a quick coat over damaged areas! Amazing UV Protection - Barricade has been rigorously tested to withstand harmful UV rays. This insures that it will hold up to sunlight and temperature changes. Most products test to 500 hours of exposure, Barricade has been proven beyond 2500 hours, and we continue to test! Used in Commercial, Industrial, & Automotive - Barricade was the factory applied coating on the original H1 Hummer Alpha model, & Heavy equipment manufacturers use it to reduce corrosion by 95% Great Coverage from Each Bottle - Each quart sized bottle covers about 12-15 square feet, so it doesn't take much to cover the parts you need! Install Without the Rush - Since there's no activators, take all of the time you need! Other products have a 60 minute or less "pot life" so you have to be quick! Barricade has no pot life, so you can take your time to do the job right! Better Value - Less Waste - With no mixing, you can use only what you need and save the rest! Barricade lasts for months, not minutes, so you'll waste less product and get a better value! 🇺🇸  MADE IN THE USA! 🇺🇸 - Proudly created, blended, and bottled in the U.S.A! CLEANING/PROTECTION NOTE - Like other rough surfaces, Barricade may hold onto fine dirt, clay, or other grime. You can make it easier to clean by coating it with our Armor or Shield products, or other good ceramic or SiO2 sealant. Should it become harder to clean, diluted purple power or other cleaner and a soft/medium bristle brush. COLORS - you must do a spray out test to ensure the color is as you expect, both in sunlight and out. Colors can vary greatly, and even how people perceive them. We cannot provide refunds or replacement product beyond the first bottle of product if you do not like the finished color. POSSIBLE STAINING - Barricade is a plastic polymer based product. In some areas of the country, the soil and road grime can be staining of various materials like Barricade and similar. We must rely on our customers to determine this risk. If it exists, we HIGHLY recommend you add some sort of clear coat on top of Barricade or a ceramic coating like our Armor product to protect it. We are not responsible for possible damage or staining. Looking for a Non-Slip Coating Product? Check out Barricade GRIP Non-Slip Coating! Purchase Options for Our Spray-in Bedliner Kit: Individual (1) Quart Bottle Individual Sprayer* Extra Large Kit without Sprayer -  (8) Quarts of Barricade Sprayable Bedliner Extra Large Kit with Sprayer - (8) Quarts of Barricade Sprayable Bedliner Plus (1) Sprayer (Covers Approximately 96-120 Square Feet) - Perfect for LargerJobs or to Have Some Extra Large Kit without Sprayer -  (4) Quarts of Barricade Sprayable Bedliner Large Kit with Sprayer - (4) Quarts of Barricade Sprayable Bedliner Plus (1) Sprayer (Covers Approximately 48-60 Square Feet) - Perfect for most Truck Beds or Full Jeep Interiors Small Kit with Sprayer - (2) Quarts of Barricade Sprayable Bedliner Plus (1) Sprayer (Covers Approximately 24-30 Square Feet) - Perfect for Smaller Areas, Fenders, Rocker Panels, and more Sample/Touch Up Bottle - 8oz - Perfect for doing a sample area or quick touch up. Currently only available in black. How long does it last? Well, let me show you...     Check out this informational and how-to video:    Directions for Use: Product is ready to use. Do not add water or solvents. For best results, sand & thoroughly degrease & dry all surfaces that will be coated. Mask areas to prevent overspray, remove tape before coating dries. Apply in minimum of 55°F & relative humidity above 20%. Use eye, skin, & respiratory protection with adequate ventilation, may stain clothing. DO NOT FREEZE - if in an area where it gets below freezing, please store in a temperature controlled location. Clean Up: Wet Coating - clean up with water & towels. Dry coating - may be mechanically removed/scraped. Spray Application: Do not apply in direct sunlight. Use Speciality Sprayer available at Rugged Restore (this page). Air Requirements: Working pressure: 40-60 psi (max 140 psi). Approximate air consumption: 5-8 CFM. *note - this is the ideal, we have had customers use much lower CFM compressors successfully, even the popular pancake compressors. Ensure air supply is clean & free of moisture and oil. Screw Sprayer directly into Barricade Sprayable Bedliner bottle. Using a scrap piece of cardboard or wood, adjust sprayer pressure (30-90psi) & nozzle to achieve desired pattern & thickness. Spray on vertical surfaces first, then on horizontal surfaces. Apply full coat on all surfaces. Product will appear gray when wet, & will change to black as it dries. Additional coats may be applied after drying for additional thickness or area repair.  Additional coats may cause the area to appear more gloss than a single coat. Roll On/Brush On Application: Do not apply in direct sunlight. Use thick nap or foam roller or quality paint brush. Place coating into suitable container for roller or brush access. Apply to vertical surfaces first, then to horizontal surfaces. Apply full coat on all surfaces. Product will appear gray when wet, & will change to black as it dries. Additional coats may be applied after drying for additional thickness or area repair. Additional coats may cause the area to appear more gloss than a single coat. Other Notes: Dries in 1 hour at 75°F and 40% humidity. Cooler temperatures will require more time. minimum temperature is 55°F. Do not allow water to sit on coating for at least 1 week. Thoroughly clean Sprayer and other tools with water immediately after use. *Sprayer comes with 1/4″ NPT air connector threading, you will need to supply the correct fitting to connect to your air hose. Sprayer is made in Italy.DO NOT FREEZE! Like many other products, this must be stored in an area that doesn't get below freezing as it can ruin the product. PREP VIDEO: This is an older video we did when we prepped our Jeep Sugar High in 2017 (the one in the video above. We went a little overboard with 60/80 grit but everything was out of it and we had it, so it made quick work.     Looking for Technical Information? Download the MSDS Receive Free Shipping on Orders within the US! Take advantage of free US shipping for orders over $99. Give your vehicle the ultimate protection it deserves! Order your sprayable bedliner now.
SHIELD COATING & SEALANT Coatings
SHIELD COATING & SEALANT from $11.99 $19.99
Keep your rig looking shiny and easier to clean for up to 6 months with Shield Surface Coating & Sealant. Like it's big brother Armor, Shield offers amazing protection for all surfaces of your off-road vehicle, making it easier to clean and keeping surfaces protected from harsh chemicals, UV rays, and other damaging elements. Use after each wash for best performance, a little goes a long way, but makes a tremendous difference. Great for Use on: Paint Vinyl Wraps Bumpers  Suspension Undercarriage Glass Tops/Fiberglass Plastic Power Coated Surfaces Sizes:  8 Fl. Oz 16 Fl. Oz Installation Information: Paint, Glass, Vinyl, Plastics - Spray onto surface and buff with a microfiber towel Bumpers, Suspension, Undercarriage - Spray a lighter amount onto surface, let dry. No need to buff off of hard to reach or non-gloss surfaces Apply to one panel or area at a time Shield can be used with any other car care products as a base or top layer to Armor. It can also be used as a drying aid by diluting between 1:2, spraying onto a wet surface and drying with a Sidekick Drying Towel Do not apply in direct sunlight allowing product to dry Can be layered for increased gloss and protection If residue is hard to remove, wipe with a damp microfiber towel Shield needs to be used within two years from the date purchased, once opened it has a shelf life of 1 year
ARMOR ULTRA DURABLE CERAMIC COATING
ARMOR ULTRA DURABLE CERAMIC COATING $39.99 $59.99
Keep your paint and other surfaces protected from the wear and tear of the trail, road, weather, and environmental factors with Armor Ultra Durable Ceramic Coating with Graphene! If it takes you longer to clean your rig than you got to spend playing in it, you need Armor...it prevents mud, dirt, dust, and other contaminants from sticking to your surfaces. Get it dirty, then rinse it off, no heavy scrubbing or rubbing! Keep your paint protected from sun fading, road salt and grime, water spots, and other environmental factors, plus get that sexy hydrophobic beading everyone loves when it gets wet! Armor creates a barrier on your paint, suspension, bumpers, fenders, and glass to keep water flowing off and dirt from sticking to all of those hard to reach and hard to clean places. Also adds protection against trail rash (for minor swirls and marks). Lasts over 5 years per application! Great for Use on: Paint Vinyl Wraps Bumpers  Suspension Undercarriage Glass Tops/Fiberglass Plastic Powder Coated Surfaces Coverage - a single 50ml bottle will cover most 4x4s like Jeeps, including bumpers and fenders. For larger vehicles, or if you intend on applying to undercarriage, suspension, or other parts, we recommend 2 bottles. *Can be poured into a small atomizing spray bottle or touchup spray gun for easier application to suspension and other undercarriage parts. Will use more product. Comes in a reusable outdoor water resistant storage case (keep for use on the trail). Photo Note - the suspension and fender on this Jeep were coated prior to 6 days in Moab, and 1400 miles on a trailer through mud, ice, and snow. As you can see, the springs, steering, shocks, and under side of the fenders are clean.  Installation Information: In addition to this kit you will need at least two but ideally four high quality microfiber towels Ensure that your vehicle is out of direct sunlight but warmer than 41 degrees F, is completely dry and will stay dry for at least 12 hours after application If needed, polish your paintwork either by machine or by hand to remove any imperfections Thoroughly clean and dry all surfaces to be coated, with a final wipe down with All Surface Cleaner Put on the nitrile gloves provided Drop several (between 5 and 10) drops of product onto the applicator provided. Work the liquid into the pad to get an even saturation Paint/Vinyl Wraps: Apply with applicator provided in overlapping strokes to an area roughly 2’ x 2’, or work to the body lines of the vehicle If the surface of the vehicle is between 41 and 60 degrees F, wait for two minutes and then fold your first towel twice to form a square, spread and remove most of the residue using a light touch. If the surface is between 60 and 77 wait for one minute and for temperatures above this, remove immediately With your second folded cloth remove all remaining residues. We advise to move your head so that you get direct and oblique views of your finish to spot all residue. It is also advisable to use bright, but flat lighting, to make residue spotting easier Once you have finished coating your vehicle we recommend repeating the process starting from the same place as you did for the first layer and coating panels in the same order so that you coat your entire vehicle with two layers of ARMOR. You do not need to wait between applying the first and second coating but it will not make it harder to apply the second coating if you do leave a much longer interval between applying the first and second layer Allow the coating to cure for at least 12 hours before getting wet We recommend allowing at least one week pass before washing your rig Suspension/Bumpers/Other Parts: In addition to the instructions above, you may use the following installation options on these parts: Apply to most bumpers as you would paint, some very rough bumpers may leave microfiber residue/fibers, so you may wish to wipe on and let dry without removing excess. For suspension, a wipe on/leave on technique works well, no need to remove the excess product. ARMOR can be poured into a small atomizing spray bottle for easier application, simply spray and leave on suspension parts. Note - this will use more product. For maintaining your finish we recommend hand washing your vehicle using a Wash Shampoo.  Use REPEL sealant every few washes for even better protection, clean-ability, and longevity of ARMOR You will find that your vehicle is significantly easier to clean and while ARMOR has significantly better resistance to caustic wash chemicals these chemicals will shorten the lifespan of any coating and are not recommended as part of your care routine An unopened bottle of ARMOR has a 12-18 month shelf life from the time of purchase Store opened bottles in a dry and cool storage area that's out of direct sunlight We recommend using opened bottles within three months of opening
SHINE & PROTECT Coatings
SHINE & PROTECT $12.99 $19.99
It's amazing how much stuff will stick to every possible surface of your rig or toys after a trip to the trails. This is especially true if you have exposed suspension parts or other uncovered components. These parts are also some of the hardest to get and keep looking clean, but we have a great product developed specifically to address both of these issues! With Rugged Restore Shine & Protect, you get both! This high-quality professional spray adds a slick layer to your vehicle so that dirt, mud, and grime don't stick to it, and it adds an awesome matte shine to suspension, tires, rubber, undercarriage, bumpers, tops, and more!  Rugged Restore Shine & Protect is a high-quality revitalizer, dressing, & protectant for rubber, plastic, vinyl, paint, tops, and powder-coat. Creates a durable and long-lasting shine and makes future washes easier. Apply to tires, trim, bumpers, suspension, fenders, hard tops, interior components and more! Versatile - Use almost anywhere on your vehicle or toys to create a protective layer, and a matte shine on exterior and interior surfaces Great on Tires - works great as a non-sticky tire shine to keep those big meats looking awesome Non-greasy - unlike cheap dressings, Shine & Protect is dry to the touch, which means it won't pick up dirt from the trail Makes Cleaning Easier - by creating a slick layers on parts like suspension, wheels, bumpers, and undercarriage, you'll be able to get all of the mud and dirt cleaned off much easier Professional Results - all of our Rugged Restore products are used and developed by professionals, get professional results at a great price Long-Lasting - each application requires very little product, so this 18oz bottle will last a very long time Note - this product is not for restoring faded trim. While it will definitely make it look nicer, if you want a longer-lasting product, please purchase Trim Renew, made specifically for that purpose. SIZE: 8 Fl.oz (with flip top lid) OPTIONS: Shine & Protect & Small Applicator Sponge   DIRECTIONS: EXTERIOR: Thoroughly clean all surfaces using Rugged Restore Easy Wash & Wax and Rugged Restore All Surface Cleaner or Rugged Restore Cleaner & Degreaser. For faded trim, bumpers, and tops, use Rugged Restore Trim Renew prior to application. Prior to use, remove lid seal. Place small amount on applicator and apply to surface. Let dry for 15 minutes. For additional shine, apply second coat. Remove residue using a microfiber towel. INTERIOR: Clean all surfaces using Rugged Restore All Surface Cleaner. Place small amount on applicator and apply to surface. Let dry for 15 minutes. Remove residue using a microfiber towel.
Barricade Grip Premium Non-Slip Polymer Coating Coatings
Barricade Grip Premium Non-Slip Polymer Coating from $4.99 $9.99
Enhance Safety in Your Surfaces With Barricade Grip Non-Slip Coating PREMIUM DIY NON-SLIP COATING!  Barricade Grip Premium Non-Slip Polymer Coating is the best non-slip coating option for do it yourselfers! Perfect for: Trailer Floors Ramps & Walls Marine Decks & Floors Agriculture Automotive Industrial Garages & Shops And More! Save the huge expense of having a commercial bedliner company install your bedliner, you can do it right from home with Barricade Sprayable Bedliner. Ready to Spray! Water-based for easy clean up, super resilient, and extremely easy to apply with our easy-to-use sprayer, paint roller, or even a paint brush! Features: Available in Gray or Black Long-lasting Protection from Corrosion & Abrasion Use on Metal, Wood, Fiberglass, OSB, and Many Other Surfaces Non-Slip Surface Water Resistant Keeps Coated Surfaces Looking Great Ready to Use - No mixing, activators, solvents, or extra chemicals to handle, simply pour the coating into a suitable container, and coat the surface! Easy Clean Up - Just Use WATER! Easy Application  Easy to Repair & Reapply Each Quart Covers Approximately 12 Square Feet Each Gallon Covers Approximately 48 Square Feet 🇺🇸  MADE IN THE USA! 🇺🇸  Looking for a Sprayable Bedliner Product? Check out Barricade Sprayable Bedliner! Purchase Options (Available in Black or Gray): Individual (1) Quart Individual (1) Gallon Individual Roller Cover Quart Kits:Quarts give an easier use and storage option by using smaller quantities at a time. Large Kit with Roller Cover (Quarts) - (4) Quarts of Barricade Grip Coating Plus (1) Roller Cover* (Coats Approximately 48 Square Feet) - Perfect for most small trailers, marine applications and more! Small Kit with Roller Cover (Quarts) - (2) Quarts of Barricade Grip Coating Plus (1) Roller Cover* (Coats Approximately 24 Square Feet) - Perfect for smaller areas and smaller projects. Gallon Kits: Gallons are best when doing larger areas all at once. Large Kit with Roller Cover (Gallon) - (1) Gallon of Barricade Grip Coating Plus (1) Roller Cover* (Coats Approximately 48 Square Feet) - Perfect for most small trailers, marine applications and more! Extra Large Kit with Roller Cover (Gallons) - (2) Gallon of Barricade Grip Coating Plus (1) Roller Cover* (Coats Approximately 96 Square Feet) - Perfect for larger trailers, marine applications and more! *Cover only, you will need a roller and appropriate extended handle. Directions for Use: Product is ready to use. Do not add water or solvents. For best results, sand & thoroughly degrease & dry all surfaces that will be coated. Mask areas to prevent over rolling, remove tape before coating dries. Apply in minimum of 60°F & relative humidity above 20%. Use eye, skin, & respiratory protection with adequate ventilation, may stain clothing. CLEANING PRIOR TO COATING: Remove or replace rotted areas in wood and other surfaces, fill with paintable filler as necessary, sand as needed for best adhesion. Clean areas with waterborne degreaser. New surfaces need only light cleaning, used surfaces such as floors require more, with attention to oil and fuel spills. All oils, fuels, and grease must be completely removed for proper adhesion. Rinse thoroughly and allow to completely dry. Mask as needed, remove tape before coating dries. APPLICATION: PRODUCT IS READY TO USE. DO NOT ADD WATER OR SOLVENTS. Use eye, skin, & respiratory protection with adequate ventilation; may stain clothing. Use 3/8” smooth or semi-smooth foam roller. *IMPORTANT - Apply at minimum of 60°F - surfaces should remain above 60°F for the duration of the application and curing process. Do not apply in direct sunlight. *Failure to follow these guidelines will result in the product failing. Apply to vertical surfaces first, then horizontal surfaces. Apply full coat on all surfaces at a thickness of 30-40mils (0.7-1.0mm). Do not force roller onto surface, coating should be applied thicker than when applying paint. Two thin coats may be applied instead of a single thick one. Wait 1 hour between coats. Clean up wet coating with water & towels; dry coating may be mechanically removed/scraped. Some surfaces may be damaged (plywood/osb) when attempting dry coating removal. Product cures in 3 stages: Dries to the touch in 90 minutes at 75°F and 40% humidity. Fully cured in 24 hours at 75°F and 40% humidity. Cooler temps (do not go below 60°) and higher humidity will require more time. Fully cross linked (final cure) in 7-12 days. Allow coating to fully cure before getting wet or exposing to temps below 60°. Coating may be painted after fully cured, but fully cross linked is desirable for best results. Do not expose coating to heavy duty use until fully cross linked. Thoroughly clean application tools and other areas prior to drying to touch, remove tape if used. STORAGE: Store in a cool, dry place 45°-85° out of sunlight. Do not allow to freeze! Unopened shelf life: 1 year; opened shelf life: 6 months.  Looking for Technical Information? Download the MSDS Shipping is on Us for Orders Over $99 in the US! Step into safety with Barricade Grip Non-Slip Coating. We're delighted to offer free shipping for orders over $99, ensuring a seamless and affordable shopping experience. Order the ultimate non-slip coating today.
VINYL SOFT TOP CLEANER & PROTECTANT KIT Vinyl Cleaner and Protectant
VINYL SOFT TOP CLEANER & PROTECTANT KIT $35.99 $39.99
We love our soft tops, but it doesn't take long before sun, wind, dirt, and age take a toll on them.  Thanks to SOFTTOPP™, you can make and get and keep your top looking its best. Although designed specifically for Jeep tops, SOFTTOPP will work perfectly for Toyotas, UTVs, and other 4x4's that have vinyl tops and surfaces. Safely Cleans and Protects Vinyl Tops, Upholstery and Accessories Non Silicone, Biodegradable, pH Balanced Cleaning Formula Leaves No Residue Extreme Protection Against UV fading, Cracking & Hardening of ALL Vinyl Surfaces Repels Dust, Grease, Dirt and Growth of Mildew, Keeping your Vinyl Like New for Years Great for Vinyl Interior Panels, Seats, Dashboards, Soft Tops and MORE! Tested & Endorsed by HAARTZ - World's Leading Manufacturer of Top Materials Also works for other automotive and household surfaces, like hot tub covers, outdoor furniture, upholstery, and more KIT INCLUDES: SOFTTOPP™  Fabric & Vinyl Top Cleaner SOFTTOPP™  Top Vinyl Top Protectant Our SOFTTOPP™ Fabric & Vinyl Top Cleaner has been formulated exclusively for fabric and vinyl soft tops and accessories. It will safely remove even the toughest dirt, grime and stains as well as some types of mildew. SOFTTOPP™ Fabric & Vinyl Top Cleaner is tough on dirt and will not harm or streak your paint, metal, plastic or rubber Jeep surfaces. Safely use SOFTTOPP Fabric & Vinyl Top Cleaner on your fabric or vinyl soft top, upholstery, carpet, rubber, plastic or other fabric or vinyl surfaces. Our low pH balanced, no bleach, anti-oxidant exclusive formula leaves no residue and it is also environmentally friendly, biodegradable and non-toxic. SOFTTOPP™ Vinyl Top Protectant is the strongest professional strength vinyl protectant on the market today. It has been exclusively formulated for exterior and interior commercial vinyl products without streaking.SOFTTOPP Vinyl Top Protectant contains NO silicone, oils or petroleum distillates and will not harm paint, aluminum, exterior trim, plastic or rubber surfaces. Our patented formula repels dust, grease, dirt and the growth of some types of mildew and with regular use keeps your vinyl like new for years to come.SOFTTOPP Vinyl Top Protectant is a long lasting washable formula that offers complete protection against UV fading, cracking and hardening of all vinyl products.SOFTTOPP Vinyl Top Protectant is the only vinyl protectant that contains ultraviolet (UV) blocking absorbers from CIBA Tinuvin© offering maximum protection from harsh environmental elements from nature and man. Can be used to safely restore a like new appearance and protect all vinyl surfaces such as interior panels, seats, dashboards,  soft tops, awnings, hot tub covers, outdoor furniture and more. DIRECTIONS: SOFTTOPP™ Fabric & Vinyl Top Cleaner Rinse vehicle top thoroughly to remove loose particles and debris. Apply SOFTTOPP Fabric & Vinyl Top Cleaner evenly on wet surface and scrub lightly with a RAGGTOPP Sot Top Cleaning Brush. Let difficult stains stand for 10 to 20 minutes before lightly scrubbing to loosen soil and stains. Follow up after cleaning with SOFTTOPP Vinyl Top Protectant. Cleaning may be more difficult in cold climates below 54° F. SOFTTOPP™ Vinyl Top Protectant Clean as directed with SOFTTOPP Fabric & Vinyl Top Cleaner and allow to thoroughly dry. Shake well. Spray SOFTTOPP Vinyl Top Protectant onto vinyl surface. Wipe dry with clean, dry microfiber towel or other type of lint free towel. Apply every 3-5 weeks for maximum UV protection. Store and use products above 40° F. Tested and Endorsed by HAARTZ, The Original Manufacturer of Jeep® Tops Since 1970  MADE IN THE USA!
MICROFIBER & FOAM APPLICATOR SPONGE Accessories Applicators & Brushes
MICROFIBER & FOAM APPLICATOR SPONGE $2.99 $4.99
This high-quality MICROFIBER & FOAM APPLICATOR SPONGE is an easy to use microfiber wax, coating, sealant, and dressing applicator. The inside sewn edges insure that only premium microfiber fabric is in contract with your paint. Perfect for use with our SHINE & PROTECT product on engines, tires, bumpers, etc.  The rectangle cubic shape provides two 3.5”x5” (for a total of 35 square inches) surfaces for application. It fits right in the palm of your hand - is easy to hold and maneuver. The flat surface covers more area for faster application. The medium-firm sponge core gently conforms to contoured surfaces and you glide across the surface. The lightweight, short pile, terry microfiber absorbs minimal product, while applying the product evenly and smoothly. When used for dressings, store in plastic bag for reuse, which saves product. Buy more than one for multiple uses, it's not recommended that you use the same applicator for tires, engine, and interior surfaces due to cross-contamination. SPECIFICATIONS: Professional quality 5” x 3”x 1.75” 260gsm Microfiber Terry 80% Polyester and 20% Polyamide - 100% Split Inside Sewn Seam Color May Vary
GLASS CLEANER Glass
GLASS CLEANER $9.99 $11.99
Keeping glass, Lexan, plexiglass, and plastic soft top windows clean on your rigs and toys is one of the hardest things to do!  This is especially true when you're running tires that stick out beyond the reach of your fenders. It seems like even on really humid days, we get mud and dirt on our windows from our big tires.  Serious Shine Rugged Restore Glass Cleaner will help you keep your glass clean and streak free! Keep some in your rig with our Rugged Restore Glass Towel and be ready to do a quick wipe down whenever you need to! Non-Toxic – Cleans your glass inside and out without any risk of breathing in harmful chemicals Versatile – Safe for use on standard and tinted windows and mirror glass, as well as digital display screens Streak-Free – Avoid streaky stains and swirls by using our robust and versatile formula Safe on All Surfaces - Use on glass, Lexan, plexiglass, and soft top windows Professional Results - all of our Rugged Restore products are used and developed by professionals, get professional results at a great price Rugged Restore Glass Cleaner is an ammonia free, streak free formula that will deliver crystal clear glass every time. Safe on tinted windows, Lexan, and plexiglass, this versatile cleaner will also remove fingerprints, smudges and anything else life may throw at your glass. Use both inside and out for the best effects and for a perfectly clear shine. Rugged Restore Glass Cleaner breaks down dirt as soon as it touches the surface, leaving you free to smoothly wipe your glass clean. Also, because it’s ammonia-free and contains no airborne chemicals, it’s safe to use on the enclosed space of your interior. The versatility of our glass cleaner means that you can use it on windows, windscreens, interior and exterior mirrors, the clear surface of your dashboard and your in-built display screen, so that the clean, smudge-free shine appears all over your vehicle. Safe Our safe formula means that you can clean the interior of your car without worrying that you or your kids are breathing in harmful chemicals. Plus, when you're able to see out of your windows, instead of looking like Ace Ventura, you're safer on the road and off! SIZE: 16 Fl.oz  DIRECTIONS: Step 1: Make sure you’re working out of direct sunlight so as to avoid any spotting. Step 2: Spray Rugged Restore Glass Cleaner directly on to the surface. For plastic soft top windows, a generous amount will help to lubricate the surface better. Step 3: Rugged Restore Glass Towel in half, and wipe in a back and forth direction across the glass, ensuring that you cover the surface all the way to the corners. Make sure that the glass is completely dry before moving on the next section – refold the towel and repeat if necessary. Tips For very dirty soft top windows, if possible, rinse prior to using Glass Cleaner. If that's not possible, use a more generous amount of Glass Cleaner, and multiple towels to avoid re-applying dirt from the towel onto the surface, which could scratch it. The best way to avoid any streaks, is to alternate the direction in which you wipe. For interior windows, wipe in a horizontal direction; for exterior windows, wipe in a vertical direction. This will ensure zero streaks, and will make it easier to determine where any touch up areas are needed.  MADE IN THE USA!
REPEL ANTIBACTERIAL WATERPROOFING FABRIC COATING Coatings
REPEL ANTIBACTERIAL WATERPROOFING FABRIC COATING $19.99 $24.97
Our off-road rigs get wet...like really wet, a lot! That's why so many of them have drains right in the floor! This can not only lead to wet clothes but also to bacterial and mold growth and smelly seats and carpet.That's where REPEL comes in, keep the water out and kill germs right on the surface!REPEL protects all kinds of fabrics from water and oil based stains. It is breathable and extremely durable and fluorocarbon free. With added BioCote® anti-microbial technology, treated surfaces will kill 99.9% of bacteria for the life of the coating.REPEL makes ordinary fabrics waterproof and easy to clean. Use it to prevent soaking, swelling or rotting on any fabric. From sails, tents and awnings to your car’s soft top and interior.The nano particles of REPEL coat each fabric fiber individually, leaving the texture unaffected, allowing the material to breathe. This means stale air will still be able to escape, while repelling water and oil-based liquids. REPEL is also color safe so will not tarnish any finishes – but we do recommend testing a small area of fabric before use.REPEL leaves no remnants of a spillage and moisture simply falls off a coated surface. Laboratory testing reveals that REPEL repels water to the highest standard set by the American Association of Textile Chemists and Colorists (AATCC) – ISO 5.Rigorous was testing reveals the REPEL fabric protection remains at its full performance level after being cleaned many times! Great for Use on: Seats Carpet Fabric door panels Seat covers Shoes/Boots Household fabrics Coverage - a single 8oz bottle will cover the interior seats and carpets of most 4x4s. For large vehicles or multiple uses, additional bottles are recommended.     Installation Information: SHAKE WELL BEFORE USE Only apply in a well ventilated area Do not dilute The surface to be treated must be exceptionally clean and dry If the surface requires cleaning we recommend using All Surface Cleaner (follow precautions) but ensure the fabric is thoroughly dried after cleaning After cleaning a convertible roof leave it to dry for at least 48 hours before applying REPEL Apply by spraying evenly from a distance of about 8-12 inches ensuring thorough saturation of the surface you are covering. Make sure your application is thorough as once REPEL has dried, you cannot apply a second coat, as the first coat will repel additional product While wearing protective gloves, rub the product into the fabric thoroughly to ensure it has penetrated. Do not do this with your bare hands Avoid over spraying on surrounding substrates, if this happens, wipe immediately with a microfiber towel Leave to dry for 24 hours, after this time the full effectiveness of the product will be achieved REPEL has a shelf life of 2 years from purchase, for best result, use within 1 year of opening
Microfiber Edgeless Detailing Towel - 16
Microfiber Edgeless Detailing Towel - 16" x 16" (2 Pack) $5.99 $7.99
This 16" x 16" Edgeless Detailing Towel is a jack-of-all-trades when it comes to detailing your rig and toys! It easily cleans glass, polishes metal, dusts interiors, buffs away wax and polish residue, and makes quick detailing easy. It does all this without scratching thanks to the edgeless design. One touch and you'll think this baby blue cloth is for pampering your body, not your vehicle. Although it feels delicate, this multi-purpose microfiber cloth is strong enough to tackle the toughest detailing jobs. Its strength lies in millions of tightly-woven microfiber strands that loosen and lift dirt and debris. Once lifted, they're trapped inside microscopic spaces within and between these strands. Double-sided cleaning power (dual pile, 2face), with a short pile on one side and long pile on the other, one cloth takes care of every detailing need. You can even fold the 16 x 16-inch cloth in fours for easy handling, and to create eight different wet or dry cleaning surfaces. The long pile side works wonders with our Quick Clean & Shine and Shine & Protect too!  They can even cut through stubborn stains and water spots, too. Whether hand polishing, waxing and final buffing, restoring shine to chrome, removing dust from interiors and picking up grime from hard-to-reach places, this edgeless microfiber cloth does it all. SPECIFICATIONS: (2) 16" x 16" Microfiber Detailing Towels Can be folded in 4 for 8 different clean sides Ultra soft Dual Pile 360 GSM Microfiber Fabric - 75% Polyester and 25% Polyamide - 100% Split Jack of all trades - Quick Detailer, Rinseless Wash, Waterless Wash, Glass, Interior, Wheels and Trim Zero Edge - Ultrasonic Cut - Scratch Free Edgeless Design
5 PIECE SOFT BRISTLE, WOOD HANDLE WHEEL, LUG NUT, & INTERIOR BRUSH SET
5 PIECE SOFT BRISTLE, WOOD HANDLE WHEEL, LUG NUT, & INTERIOR BRUSH SET $9.99 $15.99
Like all areas of your vehicles and toys that need cleaning, it's important to have the right tools for the job. This soft bristle brush kit is perfect for so many parts that need to be cleaned with a more gentle approach for sensitive areas like wheels, interior, and various engine components. Combine with our larger nylon brush and our small foam brush for a triple threat! Use for: Lug Nuts - fit perfectly into the lug holes Wheel spokes - Large or small, gives a soft brush to get into those hard to reach areas Interior - use on vents, cup holders, door panels, seats, and more Note - to avoid damage and cross contamination, it's recommend that you use a dedicated brush for both exterior and interior, do not use a wheel brush on the interior.  Details: XS: 205x20mm / 8.07 x 0.79 inch S: 220x25mm/8.66x 1 inch M: 225x30mm/8.86x 1.18 inch L: 230x35mm/ 9.06x 1.38 inch XL: 240x40mm/ 9.45x 1.57 inch Durable, soft and solid detailing brush end, can be unscrewed from the handle. Plastic Handle
Microfiber Waffle Weave Glass Flip Towel Towels
Microfiber Waffle Weave Glass Flip Towel $4.99 $7.99
Clean your glass the right way with this Microfiber Waffle Window and Mirror Quad Fold Towel.  This innovative design is pre-folded and sewn into perfect 8"x8" sections, so that you are always using your towel the way it is supposed to be. The equivalent of a 16"x16" towel folded twice into 8 distinct wiping sections, as one side of the towel gets dirty and over saturated you turn the towel over or flip it inside out so that you are using a clean towel section! Made with our premium waffle microfiber glass material, tried and tested by hundreds of professional detailers around the world! Made with premium 400gsm waffle weave and finished with true microfiber edge banding. This towel will leave your windows streak and lint free!
RUGGED RESTORE WATERLESS WASH & WAX Wash 16oz
RUGGED RESTORE WATERLESS WASH & WAX $11.99 $19.99
Wash your Jeep, 4x4 vehicle, or toys without water. Just Spray and Wipe! High shine clean with one wipe and added UV protection!  No hose or pressure washer required! Just spray, wipe, and dry off!  Works great on other surfaces like hot tub covers, exterior furniture, windows, and more!  *Due to the amount of towels that may be required and possible scratching to the vehicle, it is not recommended to start on very dirty vehicles or caked on debris or mud as a first step. High pressure rinse first, then complete the vehicle with Rugged Restore Waterless Wash & Wax!  Trigger Sprayer Included
VINYL SOFT TOP PROTECTANT Vinyl Cleaner and Protectant
VINYL SOFT TOP PROTECTANT $21.99 $27.99
We love our soft tops, but it doesn't take long before sun, wind, dirt, and age take a toll on them.  Thanks to SOFTTOPP™, you can make and get and keep your top looking its best. Although designed specifically for Jeep tops, SOFTTOPP will work perfectly for Toyotas, UTVs, and other 4x4's that have vinyl tops and surfaces. Strongest Professional Strength Vinyl Protectant Available Formulated to Protect Exterior & Interior Vinyl Extreme Protection with UV Blockers from CIBA Tinuvin Great for Vinyl Soft Tops, Seats, Door Panels, Plastic Surfaces & MORE! Will NOT Harm Paint, Metal, Plastic or Rubber Surfaces Tested and Endorsed by HAARTZ - Original Manufacturer of Jeep Top Material Since 1970 SOFTTOPP Vinyl Top Protectant is the strongest professional strength vinyl protectant on the market today. It has been exclusively formulated for exterior and interior vinyl surfaces without streaking.SOFTTOPP Top Vinyl Protectant contains no silicone, oils or petroleum distillates and will not harm your paint, metal, exterior trim, plastic or rubber surfaces. Our patented formula repels dust, grease, dirt and the growth of some types of mildew which with regular use keeps your vinyl like new for years to come.Long lasting washable formula, SOFTTOPP Vinyl Protectant offers complete protection against UV fading, cracking and hardening of all vinyl products.RAGGTOPP Convertible Top Vinyl Protectant is the only Jeep vinyl protectant that contains ultraviolet (UV) blocking absorbers from CIBA Tinuvin© offering maximum protection from harsh environmental elements. Can be used to safely restore a like new appearance and protect all vinyl surfaces including soft tops, interior panels, seats, dashboards, tire covers, and more. Easy application, simply spray on then wipe dry. DIRECTIONS: Clean as directed with SOFTTOPP™ Fabric & Vinyl Top Cleaner then allow to dry thoroughly . Shake well. Spray SOFTTOPP Vinyl Top Protectant onto vinyl surface, or spray onto microfiber applicator pad and wipe onto your Jeep's vinyl surface. Wipe dry with clean, dry microfiber towel or other type of lint free towel. Apply every 3-5 weeks for maximum UV protection. Tested and Endorsed by HAARTZ, The Original Manufacturer of Jeep® Tops Since 1970.  MADE IN THE USA!
Super Soft Microfiber Wash Mitt Wash
Super Soft Microfiber Wash Mitt $9.99 $14.99
Don't just grab a dirty sponge or dish rag when it comes time to wash your rig and toys, use this super soft microfiber wash mitt! With the soft and safe cleaning power of microfiber "fingers", you'll be able to get into all the nooks and crannies, while ensuring you won't scratch the finish. SPECIFICATIONS: Safe and effective on all surfaces Non-scratch microfiber chenille weave - no exposed tag High quality blue microfiber gently washes away dirt and debris Seem inside the mitt for hand comfort and control without slipping off Machine washable
Hero Drying Towel Towels
Hero Drying Towel $29.99 $49.99
INTRODUCING...THE HERO DRYING TOWEL With The Hero Drying Towel, you can enjoy a BETTER DRYING EXPERIENCE. The HIGHEST QUALITY at the LOWEST PRICE HUGE - 20 x 40 Inches 1100 GSM LUXURIOUSLY SOFT MICROFIBER Double Layered - GET TWO TOWELS IN ONE Twist Pile with a HIDDEN EDGE *color may vary, but towel is the same
QUICK CLEAN & SHINE Cleaning
QUICK CLEAN & SHINE $17.99 $21.99
Even though we love getting our rigs and toys dirty, we'll admit that we also love seeing them clean. Sometimes, you only need a quick wipe down to make your rig look amazing! With Rugged Restore Quick Clean & Shine, you can not only make that quick clean faster and easier, but you'll also add shine and protection. Rugged Restore Quick Clean & Shine is a quick detailer, cleaner, & spray wax that keeps your vehicles and toys looking awesome between washes while adding extra shine and protection. Just spray and wipe to clean away dust and dirt. Use on the trail or at home! Easy Quick Cleaning - use anywhere when you need to quickly clean your rig More than a Quick Detailer - use as a quick detailer, cleaner, and spray wax for ultimate value Adds Shine and Protection - works like a spray wax to add shine and protection Use on Any Surface - paint, bumpers, suspension, wheels, and more A Little Goes a Long Way - with our concentrated formula, it doesn't take a ton of product to get the job done Professional Results - all of our Rugged Restore products are used and developed by professionals, get professional results at a great price SIZE: 18 Fl.oz  DIRECTIONS: Wheels, Tires, Suspension: Step 1: Hold bottle 6-8 inches away and spray product onto parts. Step 2: Wipe with a clean Rugged Restore Microfiber Towel. Painted and Wrapped Surfaces: Step 1: Hold bottle 6-8 inches away, and working in sections, spray product onto surface. Step 2: Wipe with a clean Rugged Restore Microfiber Towel. Step 3: Repeat for entire area, using additional clean towels as needed. Finish with Rugged Restore Shine & Protect. For glass, use Rugged Restore Glass Cleaner. Only use on lightly soiled surfaces, for heavier cleaning, use Rugged Restore Wash Shampoo.  MADE IN THE USA!
Mitt on a Stick Wash
Mitt on a Stick $59.99 $79.99
MITT ON A STICK: Reach New Heights in Rig Washing Efficiency! Stop climbing all of your rig to reach higher spots to wash!  With Mitt on a Stick, you can easily reach every area of your rig with a paint-safe soft wash mitt, both high and low! NEW IMPROVED VERSION! Features: Soft Plush Microfiber Wash Mitt Flexible & Forgiving Rubber Head (safe for vehicle) Fits in 3.5 and 5 Gallon Buckets 61" pole in 3 Interlocking Sections  *Depending on stock at the time of order, the mitt part of the product may vary, but will deliver the same performance as the ones shown. Check out this Video:
Advanced Detailing Kit - Refill
Advanced Detailing Kit - Refill $69.99 $89.99
If you have the Advanced Detailing Kit, this is a great way to refill the chemical products and replenish those items you've used, without needing all of the extras that come with it! All Rugged Restore products are professional grade, strong enough for professional detailing, but priced for the DIY customer. We have been in the professional detailing industry for years and we use all of our products to make sure they perform amazingly at a fair price! This kit a ton of great detailing products to help you get your rigs and toys clean quickly and efficiently...with professional level results!  Advanced Detailing Kit Refill Includes:  Easy Wash & Wax - Wash Soap/Shampoo Shine & Protect - Dressing and Protectant Cleaner & Degreaser - Heavy Duty Cleaner and Degreaser Waterless Wash & Wax - When the rig isn't too dirty, this is a fast way to get it clean again Shield Sealant - Easily add a layer of protection and shine to your rig that lasts 4-6 months! Glass Cleaner - You won't find a better way to clean your glass SUBSCRIBE AND SAVE! Make sure you always have enough products on hand! Subscribe to have automated shipments of this refill kit sent to you. *must take initial delivery and (1) additional delivery in order to receive the discounted pricing. To Subscribe, simply select the check box/radio button on the left of that option and select a Delivery Frequency from the dropdown list. 

FREE US SHIPPING OVER $99

Spend $99 and get FAST and FREE US shipping.

NO-HASSLE RETURNS

We make product returns super easy!

SATISFACTION GUARANTEED

If you're not happy, we're not happy.

100% SECURE CHECKOUT

Your data and information is safe!